CAPABILITY CHECK LIST
Types of PCBs         Double-sided / Multi-layer / Single-sided
Max board size (usable)
- Double side / single side
- Multi-layer
820 mm x 508 mm
533.4 mm x 406 mm
No. of Layers 8
Standard Thickness of PCB 1.6 mm, 2.4 mm, 3.2 mm
Board Thickness Tolerance
- Double sided & single sided
upto 1.6mm
upto 2.4mm
upto 3.2mm
- Multi-layer
upto 1.6mm
upto 2.4mm
upto 3.2mm
  +/­ 100m
+/­ 150m
+/­ 200m

+/­ 130m
+/­ 200m
+/­ 200m
INPUT DATA MEDIA
Gerber, PCB File, MAX File  
MIN. RESOLUTION ON
N.C. Drill 0.001± mm
Special Hole Blind & Buried
FR4 Glass Epoxy (0.32, 0.53, 0.77, 1.4, 1.6, 2.4, 3.2 mm)
Duroid (0.8754 mm)
Base Laminate Polyamide (0.145 mm)
Paper Phenolic (1.6 mm)
Teflon (0.80 mm)
Base Copper (17.5m, 35m, & 70m,105u)
MIN. HOLE DIAMETER
PTH 0.40 mm (Finished)
0.30 mm  (Finished)
NPTH 0.40 mm
HOLE SIZE TOLERANCE
PTH

NPTH
+50 m for Hole dia < 1 mm & + 100 m for Hole dia > 1 mm
+50 m for all types of Holes can be provided
Aspect Ratio 1:5
Press Fit Connectors can be made as per requirement
MINIMUM TRACE WIDTH
Standard 0.20 mm
Special 0.10 mm
MINIMUM TRACE SPACING
Standard 0.20 mm
Special 0.10 mm
GRID
Standard 2.54 mm
Special 1.27 mm
0.635 mm
Solder Mask Two Component Thermal Mask
UV Thermal Mask
Photo Imageable Solder Mask
SOLDER MASK
Positional Registration
Minimim Spacing
Within 50 m
0.10 Mm for Pism,  0.20 mm for 2 Component
THICKNESS ON CONDUCTORS
Surface 15 m Minimum
SURFACE FINISH
Solder Mask on Bare Conductors  
With Immersion Tin Plating (ROHS Compliance)  
PLATING
Copper inside Hole    25 m Minimum
Tin/Lead Inside 8 m Minimum
Tin/Lead at Knee 2 m Minimum
Nickel Flush
 
MINIMUM LEGEND LINE
Width 0.10 mm
REGISTRATION
Patterns of Two Sides Within 50 m
Ckt. Pattern And Hole 50 U from the actual position of Hole  
BOW AND TWIST
Double Side / Single Side
Multi-layer
1.0% (Maximum)
1.5% (Maximum)
NPTH 0.40 Mm
ELECTRICAL TESTING CAN BE DONE FOR MINIMUM GRID DISTANCE OF 2.54 mm
(1.27MM & 0.635 AS A SPECIAL CASE)  UPTO  220 VOLTS)
Prepreg Thickness 0.064 mm & 0.18 mm
Copper Foils Thickness 17 m & 35 m
Note: The above mentioned Tolerances and Specifications are in accordance with the LPC 600 Standards Class 2.